Getrus International

During IVF and andrology operations, Sperm counting chamber is used to count sperm from an unadulterated sperm samples. The counting chamber is just 10 microns deep, one tenth the depth of other haemocytometers, making it the shallowest chamber ever discovered.

Our Mortuary cabinets are low temperature refrigerated cabinets that are used to keep dead bodies for short or long time. These cabinets are widely used at hospitals, railways, airports, disaster & army camps and army hospitals etc. These cold cabinets are also called by other names such as morgue freezer, deal body storage refrigerator, mortuary fridge and mortuary chambers etc. Usually, the temperature of mortuary storage cabinet remains between 1°C to 5°C but in some cases it may go freezing side such as 0°C, -10°C and even -20°C that can also be designed as an option.

As standard, we keep our mortuary cabinet temperature factory set at -2°C that can also be editable as per individual requirement. For precise temperature controlling we use high resolution easy to read display and many in-built safety features. Each chamber has its own temperature controller; if you have six body mortuary refrigerators then there are six numbers of temperature controllers; one controller for each chamber.

Features & Benefits

Overall stainless steel 304 construction Individual refrigeration system for each chamber Separate doors with handle & lock for each chamber

Stainless steel 304 trolley w/ roller wheels Microprocessor based temperature controller Temperature high/low variation alarm Compressor delay time before restart

Construction: - Complete made of Stainless Steel.

Temperature Range:- Ambient +5°C to 60 °C.

Temperature Accuracy: ± 0.2°C. .

Temp Increments :-0.1°C. Temp.

Uniformity: ± 0.2°C.

Temp. Uniformity :- + 0.2°C.

Aluminium Block:- 3 Nos hold capacity of 18 Test Tube.

 Temp. Controller:- Microprocessor Base Temp. Controller

B-process, N-process, Dri-Tec drying - process. Automatic (with manual override facility in caseofauto mechanism failure).

Sterilizing Cycle Processes available: 121 degree C Wrapped, 134 degrees C Wrapper RS00 134 degree C Flash/Rapid open instrument cycle, 134 degree C textile, Test program etp Bowie & Dick, Leak Test. Audio-visual Alarm facility available for notifying: Temperature sensor failure, Pressure sensor failure, Phase time out, Door improperly closed, Power failure (no alarm if duration of power failure < 10 sec), Safety device malfunctioning, Low water level, Cassette improperly closed.

Features

The tabletop autoclave can be used for medical and surgical items in ophthalmology, dentistry, and internal medicine clinics, such as packaged items, hollow and porous items for sterilization, and can also be used in emergency rooms and small laboratories. GIA-ZB series sterilizer is an automatic high temperature and rapid pressure sterilizer which works with steam as a medium. It can be widely used in departments of stomatology and ophthalmology, operating room, supply room, dialysis room, and other medical institutions. It is unpacked items, solid instruments, dental handpieces, endoscopes, implantable instruments, dressing fabric, rubber tubes, etc.

Build-in open-type water tank

The sterilizer adopts an easy-clean open-type water tank which can support repeated program running if fully injected with water.

High-efficiency ultimate vacuum

The sterilizer adopts a high-efficiency low noise vacuum system which has excellent effects. Large LCD display for GIAZA/GIAZB The LCD screen can display temperature, pressure, time, operating status, failure warning, and other information. It is convenient for customers to observe the sterilizer's running status. Multiple program types The system has various programs, including packed items, unpacked items, BD testing program, vacuum testing program, and drying function. The custom program, rapid program and preheat function (for GIA-Z16B). Standard USB port for GIAZA/GIAZB Users can store the sterilization data with a USB disk. Optional mini printer can be attached to record the sterilization process.

The High Low Humidity Test Chambers from Getrus are corrosion test chambers that are

used to simulate high or low humidity conditions for testing the rust preventing capacity

of various oils and greases. These High Low Humidity Simulation Chambers find widespread

usage in research organizations, educational institutions and industrial units and are most

commonly employed by petroleum and chemical industries.

Standard features

1.Double walled modular structure with 3" thick PUF insulation

2.Inside Stainless Steel and Outside Mild Steel Powder Coated or Stainless Steel

3.Heavy duty Caster wheel 2 front wheel Lockable & Back 2 wheel unlockable

4.Glass door with secure gasket for better observation of the samples (optional)

5.Heavy-duty door hinges and latches to maintain a secure and uniform seal.

6. stainless steal trays with adjustable height.

7. U shaped s.s. nichrome wire air heater.

8.humidity system with evaporation tray and reservoir tank with water level arrangement.

9. Uniform air forced circulation for uniformity air through out the chamber through blowers

and circulation motors.

10. Thermostat sensor to cut off the supply in case of overshoot and undershoot of temperature

giving audio visual alarm.

11. power supply works on 220V AC / 16 amp. Single phase 50Hz.

Temperature controller system

Digital dual LED or PLC based with 0.1 °C steps readability and stability.

Single setpoint, ramp & soak to 8 steps " Optional "

Audible visual alarm.

Set temperature according to the sample's testing working environment.

Auto tuning of controller Digital dual Display

Door Open Alarm

Temperature & Humidity High Deviation Alarm

Water input Failure Alarm

Application to all wrapped or non-wrapped, solid, hollow load products type A and porous products or related articles.This sterilizer can be used for dental clinic, laboratory, surgical room,emergency room, ophthalmology, gynaecology and steam, cosmetic hospital and so on, by doctors and professionals. Autoclaves are equipment for sterilizing widely used in microbiology, medicine, podiatry, tattooing, body piercing, veterinary science, mycology, dentistry, and prosthetics fabrication. They vary in size and function depending on the media to be sterilized.

Features

Adopting European N standard, with thermal vacuum and drying functions, it can be used for A-type hollow instruments and solid instruments. Thermodynamic vacuum guarantees elimination of cold air from the cavity and makes sure that reaches the optimal effect of sterilization. Specially design for dental clinic field, it could sterilize 12 pieces hand piece at same time,simply and efficiently.

Microprocessor control, LED display and modularized panel for easy operation. Automatic malfunction detection system makes easy maintaining.

Getrus manufactures Industrial Dehumidifier to reduce the level of humidity in the air, usually for health reasons. Pharmaceutical Air Dehumidifier are also used in industrial climatic chambers, to control relative humidity within certain rooms to stay at levels conducive to processing of products. Air Dehumidifier are designed to suit unique moisture/humidity control needs during processing, packaging, drying and storage.

FEATURES:

■ Microprocessor controlled System

Extremely Silent

Defrost automatically when the ambient temperature is below 18 deg.C.

Backward air outlet

Adjustable air direction & portable

Non-touch point tank full switch

Corrosion Resistant Casing

Easy to remove desiccant rotor

R-134a CFC-Free Refrigerant

Power Reciprocating compressor Electric, steam, direct or indirect fired gas reactivation Cleanable or disposable 30% inlet air filters

Easy installation & economical

Getrus Pharmaceuticals Drug Stability Test Chamber specially designed equipment that are used for studying the stability and shelf life of various drugs and drug-related substances. They are also employed for biological studies, seed testing and testing of mechanical and electronic components and find widespread usage in pharmaceutical industries, biotechnology industries, food industries, medicine research and scientific research institutes. The Stability Test Chambers are capable of providing highly accurate and optimum conditions of temperature, humidity and illumination for long-term stability tests. They are suitable for long-term experiments, high temperature tests, accelerated tests as well as stability tests under bright lights. Drug Stability Test Chamber and Stability Chamber are designed in accordance with international standards and bear CE certification for safety and reliability.

Getrus manufactures Industrial Dehumidifier to reduce the level of humidity in the air, usually for health reasons. Pharmaceutical Air Dehumidifier are also used in industrial climatic chambers, to control relative humidity within certain rooms to stay at levels conducive to processing of products. Air Dehumidifier are designed to suit unique moisture/humidity control needs during processing, packaging, drying and storage.

FEATURES:

■ Microprocessor controlled System

Extremely Silent

Defrost automatically when the ambient temperature is below 18 deg.C.

Backward air outlet

Adjustable air direction & portable

Non-touch point tank full switch

Corrosion Resistant Casing

Easy to remove desiccant rotor

R-134a CFC-Free Refrigerant

Power Reciprocating compressor Electric, steam, direct or indirect fired gas reactivation Cleanable or disposable 30% inlet air filters

Easy installation & economical

Getrus manufactures Industrial Dehumidifier to reduce the level of humidity in the air, usually for health reasons. Pharmaceutical Air Dehumidifier are also used in industrial climatic chambers, to control relative humidity within certain rooms to stay at levels conducive to processing of products. Air Dehumidifier are designed to suit unique moisture/humidity control needs during processing, packaging, drying and storage.

FEATURES:

■ Microprocessor controlled System

Extremely Silent

Defrost automatically when the ambient temperature is below 18 deg.C.

Backward air outlet

Adjustable air direction & portable

Non-touch point tank full switch

Corrosion Resistant Casing

Easy to remove desiccant rotor

R-134a CFC-Free Refrigerant

Power Reciprocating compressor Electric, steam, direct or indirect fired gas reactivation Cleanable or disposable 30% inlet air filters

Easy installation & economical

The High Low Humidity Test Chambers from Getrus are corrosion test chambers that are

used to simulate high or low humidity conditions for testing the rust preventing capacity

of various oils and greases. These High Low Humidity Simulation Chambers find widespread

usage in research organizations, educational institutions and industrial units and are most

commonly employed by petroleum and chemical industries.

Standard features

1.Double walled modular structure with 3" thick PUF insulation

2.Inside Stainless Steel and Outside Mild Steel Powder Coated or Stainless Steel

3.Heavy duty Caster wheel 2 front wheel Lockable & Back 2 wheel unlockable

4.Glass door with secure gasket for better observation of the samples (optional)

5.Heavy-duty door hinges and latches to maintain a secure and uniform seal.

6. stainless steal trays with adjustable height.

7. U shaped s.s. nichrome wire air heater.

8.humidity system with evaporation tray and reservoir tank with water level arrangement.

9. Uniform air forced circulation for uniformity air through out the chamber through blowers

and circulation motors.

10. Thermostat sensor to cut off the supply in case of overshoot and undershoot of temperature

giving audio visual alarm.

11. power supply works on 220V AC / 16 amp. Single phase 50Hz.

Temperature controller system

Digital dual LED or PLC based with 0.1 °C steps readability and stability.

Single setpoint, ramp & soak to 8 steps " Optional "

Audible visual alarm.

Set temperature according to the sample's testing working environment.

Auto tuning of controller Digital dual Display

Door Open Alarm

Temperature & Humidity High Deviation Alarm

Water input Failure Alarm

Bacteriological Incubator is used for storage and bacterial culture growth at 37°C. These laboratory incubators are also known as heated incubators because their temperature range remains between above ambient to 60°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber. Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV).

JONTECH bacteriological incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance. and Inner chamber with complete stainless steel. 75mm thick insulation to avoid heat losses.

Getrus manufactures Industrial Dehumidifier to reduce the level of humidity in the air, usually for health reasons. Pharmaceutical Air Dehumidifier are also used in industrial climatic chambers, to control relative humidity within certain rooms to stay at levels conducive to processing of products. Air Dehumidifier are designed to suit unique moisture/humidity control needs during processing, packaging, drying and storage.

FEATURES:

■ Microprocessor controlled System

Extremely Silent

Defrost automatically when the ambient temperature is below 18 deg.C.

Backward air outlet

Adjustable air direction & portable

Non-touch point tank full switch

Corrosion Resistant Casing

Easy to remove desiccant rotor

R-134a CFC-Free Refrigerant

Power Reciprocating compressor Electric, steam, direct or indirect fired gas reactivation Cleanable or disposable 30% inlet air filters

Easy installation & economical